Stepper Motor. 10.4V. with Bracket/Pigtail & 8mm Coupling


Stepper Motor. 10.4V. with Bracket/Pigtail & 8mm Coupling
Stock Number: 33449 MS
 Review Average:  
 Number of Reviews: 1
 View ReviewsReview this item
$10.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Single axis set with Stepper, Mounting Bracket, 10in. Pigtail and Coupling for a 8mm shaft.
Motor: MINEBEA: NEMA 17, 2 Phase Bi-Polar 4 lead
COIL: 10.4V/.33A/32ohm/71mH
STEP ANGLE: 1.8 deg
340mN/m (48oz/in) holding torque.
4 M3-0.5 Threaded mounting holes.
Coupling: 1” X 3/4” dia Helical Cut Aluminum
Bracket: L: 2” (Motor) L: 2-1/16” (Base) W: 1-15/16”, Gusseted steel “L” Bracket, Black finish. Four holes for motor & 2 slots for mounting the assembly
Includes Allen Wrench for Coupling and 4 Screws for Bracket.
WT: .86


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
cooler, higher torque stepper
This 10.4 VDC Nema17 motor runs fine at 12vdc. It runs cooler and has more torque than other 12vdc steppers Ive used. Even those costing 25% more.
- Gary, KS